Electric Biking ABC Quick Check
ABC QUICK CHECK
A is for air
• Inflate tires to rated pressure as listed on the sidewall of the tire
• Use a pressure gauge to insure proper pressure
• Check for damage to tire tread and sidewall; replace if damaged
B is for brakes
• Inspect pads for wear; replace if there is less than 1/8” of pad left
• Check pad adjustment; make sure they do not rub tire or dive into spokes
• Check brake level travel; at least 1” between bar and lever when applied
C is for cranks, chain and cassette
• Make sure that your crank bolts are tight; lube the threads only, nothing else
• Check your chain for wear; 12 links should measure no more than 12 1/8 inches
• If your chain skips on your cassette, you might need a new one or just an adjustment
Quick is for quick releases
• Hubs need to be tight in the frame; your quick release should engage at 90°
• Your hub quick release should point back to insure that nothing catches on it
• Inspect brake and seat quick releases to insure that they are closed tightly
Check is for check it over
• Take a quick ride to check if derailleurs and brakes are working properly
• Inspect the bike for loose or broken parts; tighten, replace or fix them
• Pay extra attention to your electric bike during the first few miles of the ride